The maintenance of the color sorter is something we have been emphasizing, because only if it is well maintained can it be used better. Today we have a detailed understanding of the daily maintenance knowledge of the color sorters in order to further deepen everyone's impression.
1. Maintenance operations per shift
Check whether the components such as the industrial color sorter, air compressor, air storage tank, filter, etc. are in good condition, whether there is any looseness, and clean up all parts of dust and drainage.
2. Dust scraper for dust removal
Clean up the dust on the epidermal (hair) brush of the dust scraper once a week with an air gun; check if the fur (hair) brush is running smoothly once a month. If it is loose, tighten the loose position. After using for a period of time, if the soft skin (hair) of the fur (hair) brush is dumped to one side, you can remove the fur (hair) brush and reverse it up and down to continue using.
3. Dust removal in the sorting room
If there is dust on the sorting indoor and outdoor glass of the color sorter (usually the front glass of the sorting room), wipe it with a clean soft cloth dipped in alcohol, and check whether the dust scraper is running normal. Wait for the glass surface to be completely dry and clean before proceeding with color selection.
4. Filter drainage
The filter device of all pneumatic air supply parts of the machine must be discharged frequently (at least 2 times per shift) to prevent various impurities from entering the core parts of the machine to damage the machine, so as to avoid unnecessary losses.
5. Check during operation
During the operation, the patrol signal instructions (including work instructions, alarm instructions) and the action of the spray valve
6. Maintenance operation after work shutdown
Please use an air gun to clean the vibrator (especially the condensed material in the vibrator bucket), the inside of the machine body, the hopper, and the dust scraper.