Necessary daily maintenance, such as: 1. Make sure the glass surface of the camera case is clean 2. When the machine is working in a dusty environment, clean up all parts of the color sorter to avoid dust accumulation 3. After the shutdown, check whether all materials have been sorted, and if there are stagnant materials, clean them up in time Necessary maintenance required every week: 1. Check wh...

When we buy a color sorter, how should we assemble it? I hope the following introduction is helpful to you. 1. Fix the prepared rack 2. Prepare the light box (the former light box is an example, the rear light box is the same) 1. Use glass glue to paste two pieces of glass in the middle of the light box (to prevent dust from entering the light box, and to enable the camera to see the material) 2. ...

Feeder: To achieve the stability and regulation of flow. Groove: Get a uniform tea flow and a constant tea grain speed. Fluorescent lamp: provides a specified light frequency area, stable performance of the light source. Background plate: Contrasts or transmission light that shines on the tea stream and reflects it to the photoelectric sensor. CCD/CMOS device: Using the difference in color between...

Mini series KD32 colour sorter is our newly developed mini model, which is suitable for the selection of nut, plastic, rice and other materials. It uses a new optical technique to remove foreign defects from raw materials, which the accuracy raises up to 99.99% at a time. Features Of Our New generation mini color sorter: *Nuts Defects Sorting through High Resolution 4096 Pixel CCD Camera,High Reli...